Ecolego Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Tutorial 2 - Running a simulation ======


===== 6/7 =====

In this lesson we will set start and end time, select simulation outputs and run a simulation.

\\

**Simulation settings**

  - Click the {{:SimulationSettings24.png|Simulation Settings}} button in the [[Menu_bar#Toolbar|toolbar]] or select **Simulation | Simulation Settings** from the [[Menu_bar|Menu bar]].
  - Make sure that the **General** tab is selected. Set the **Time unit** to //Days// and the **End time** to 100.
  - Select the **Outputs** tab
  - Select all the [[Block|blocks]] of the model, including the [[Transfer|transfers]].
  - Click **Ok** to close the window.

\\

**Running a simulation**

  - Click the {{:ChartView24.png}}**Simulation** button on the [[Menu_bar#Toolbar|toolbar]].
  - Click the {{:RunAll24.png|Run}} button on the [[Menu_bar#Toolbar|toolbar]] to start the simulation.
  - When the simulation has finished, the [[Results_window|Results window]] should list the blocks that you selected to be simulation outputs above.

\\

**Next**

  * [[Tutorial_2-Inspecting_results|Inspecting results (7/7)]]

**Previous**

  * [[Tutorial_2-Assigning_material_dependent_values|Assigning material dependent values (5/7)]]

**References**

  * [[Tutorials|Back to Tutorials]]
  * [[start|Home]]

Ecolego Wiki

User Tools

Site Tools

Page Tools