1. Create two parameters and assign them the values 10 and 4 respectively.
2. Create an expression.
3. Edit the expression, select the Values page and click on the default row of the table. The expression editing tool should appear underneath the table.
4. In Functions box of the editing tool, open the Imported node. You should find your function my_add here.
5. Enter the value “my_add(Parameter1,Parameter2)” in the default row of the table.
6. Close the window by clicking ok.
7. Run a simulation and investigate the output result for the expression. If you have completed all steps properly, the result should be 14.

Solution to the excersise

• solution_tutorial_8.eco
  

Previous

Editing the function (3/4)

Reference

• Back to Tutorials
• Home